Clean sealing surfaces
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Damage to the surface .
The use of metal-cutting tools (e.g., emery cloths) for cleaning surfaces can damage them and lead to leaks and/or engine damage .
Damage to the surface .
The use of metal-cutting tools (e.g., emery cloths) for cleaning surfaces can damage them and lead to leaks and/or engine damage .
- Do not use any metal-cutting tools.
- Remove coarse backlogs from the sealing surfaces of the cylinder head and the crankcase using special tool 0 495 103 (11 4 471)
.NOTE: RISK OF DAMAGE
Damage to the surface .
The use of metal-cutting tools (e.g., emery cloths) for cleaning surfaces can damage them and lead to leaks and/or engine damage .- Do not use any metal-cutting tools.
- Remove fine backlogs from the sealing surfaces of the cylinder head and the crankcase using special tool 0 495 104 (11 4 472)
.
- Clean all blind holes of the cylinder head and the engine block.
- Remove special tool (B) from special tool 2 364 711 .