Removing the cylinder head from the assembly jig
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Heavy component
.
Heavy components can lead to injury or damage .
Heavy components can lead to injury or damage .
- Remove and install heavy components with the aid of another person/other persons.
- Release the screws (1) from the special tool 0 494 150 (11 9 440)
.
- Loosen screw (2) .
- Feed out rod (1)
in arrow direction
and set aside.
- Stage the special tool (workshop crane) 2 220 718
.
- Prepare the special tool 0 490 567 (11 0 020)
.
- Insert and install the special tool 0 490 567 (11 0 020) at the cylinder head (1) .
- Attach the special tool 0 490 567 (11 0 020)
to the workshop crane 2 220 718
.
- Feed out and remove the cylinder head (1) with the workshop crane 2 220 718 and special tool 0 490 567 (11 0 020) from the device (2) .