Diagnostic Trouble Codes (ACTIVEHYBRID) - DTC P02CC, BMW DTC 116101 Through DTC P0247, BMW DTC 123104

• DTC P02CC, BMW DTC 116101: Cylinder equalization, adaptation, lower range, cylinder 1: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02CE, BMW DTC 116201: Cylinder equalization, adaptation, lower range, cylinder 2: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02D0, BMW DTC 116301: Cylinder equalization, adaptation, lower range, cylinder 3: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02D2, BMW DTC 116401: Cylinder equalization, adaptation, lower range, cylinder 4: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02D4, BMW DTC 116501: Cylinder equalization, adaptation, lower range, cylinder 5: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02D6, BMW DTC 116601: Cylinder equalization, adaptation, lower range, cylinder 6: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02D8, BMW DTC 116701: Cylinder equalization, adaptation, lower range, cylinder 7: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02DA, BMW DTC 116801: Cylinder equalization, adaptation, lower range, cylinder 8: adaptation below valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AA, BMW DTC 117101: Injector, cylinder 1, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AB, BMW DTC 117201: Injector, cylinder 2, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AC, BMW DTC 117301: Injector, cylinder 3, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AD, BMW DTC 117401: Injector, cylinder 4, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AE, BMW DTC 117501: Injector, cylinder 5, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12AF, BMW DTC 117601: Injector, cylinder 6, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12B0, BMW DTC 117701: Injector, cylinder 7, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12B1, BMW DTC 117801: Injector, cylinder 8, smallest-quantity adaptation: adaptation outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0171, BMW DTC 118001: Mixture control: mixture too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0172, BMW DTC 118002: Mixture control: mixture too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0174, BMW DTC 118101: Mixture control 2: mixture too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0175, BMW DTC 118102: Mixture control 2: mixture too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0171, BMW DTC 118401: Mixture control: mixture too lean; large deviation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0172, BMW DTC 118402: Mixture control: mixture too rich; large deviation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0174, BMW DTC 118501: Mixture control 2: mixture too lean; large deviation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0175, BMW DTC 118502: Mixture control 2: mixture too rich; large deviation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2097, BMW DTC 118601: Oxygen sensor before catalytic converter, fine mixture control: exhaust gas after catalytic converter too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2096, BMW DTC 118602: Oxygen sensor before catalytic converter, fine mixture control: exhaust gas after catalytic converter too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2099, BMW DTC 118701: Oxygen sensor before catalytic converter 2, fine mixture control: exhaust gas after catalytic converter too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2098, BMW DTC 118702: Oxygen sensor before catalytic converter 2, fine mixture control: exhaust gas after catalytic converter too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P114A, BMW DTC 118801: Oxygen sensor after catalytic converter, fine mixture control: exhaust gas after catalytic converter too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P114B, BMW DTC 118802: Oxygen sensor after catalytic converter, fine mixture control: exhaust gas after catalytic converter too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P114C, BMW DTC 118901: Oxygen sensor after catalytic converter 2, fine mixture control: exhaust gas after catalytic converter too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P114D, BMW DTC 118902: Oxygen sensor after catalytic converter 2, fine mixture control: exhaust gas after catalytic converter too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0171, BMW DTC 118A01: Mixture control, low emission deterioration: mixture too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0172, BMW DTC 118A02: Mixture control, low emission deterioration: mixture too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0174, BMW DTC 118B01: Mixture control 2, low emission deterioration: mixture too lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0175, BMW DTC 118B02: Mixture control 2, low emission deterioration: mixture too rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P119D, BMW DTC 118C02: Mixture adaptation, injector ageing: cylinder bank 1: long-term adaptation too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P119E, BMW DTC 118D02: Mixture adaptation, injector ageing: cylinder bank 2: long-term adaptation too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0193, BMW DTC 119001: Rail pressure sensor, electrical: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0192, BMW DTC 119002: Rail-pressure sensor, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3251, BMW DTC 119101: Rail pressure sensor 2, electrical: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3250, BMW DTC 119102: Rail-pressure sensor 2, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2542, BMW DTC 119201: Fuel low-pressure sensor, electric: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2541, BMW DTC 119202: Fuel low-pressure sensor, electrical: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2540, BMW DTC 119208: Fuel low-pressure sensor, electric: signal implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0088, BMW DTC 11A001: Fuel high-pressure system, fuel pressure: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P302A, BMW DTC 11A001: Fuel high-pressure system, fuel pressure: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0087, BMW DTC 11A002: Fuel high-pressure system, fuel pressure: minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P302C, BMW DTC 11A002: Fuel high-pressure system, fuel pressure: minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P100B, BMW DTC 11A101: High-pressure fuel system 2, fuel pressure: Maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P302B, BMW DTC 11A101: High-pressure fuel system 2, fuel pressure: Maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P100A, BMW DTC 11A102: High-pressure fuel system 2, fuel pressure: Minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P302D, BMW DTC 11A102: High-pressure fuel system 2, fuel pressure: Minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P008B, BMW DTC 11A201: Fuel low-pressure system, fuel pressure: pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3095, BMW DTC 11A202: Fuel low-pressure system, fuel pressure: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3096, BMW DTC 11A204: Fuel low-pressure system, fuel pressure: minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303A, BMW DTC 11A501: Fuel high-pressure system, measuring range: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303A, BMW DTC 11A502: Fuel high-pressure system, measuring range: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303C, BMW DTC 11A504: Fuel high-pressure system, measuring range: minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303B, BMW DTC 11A601: Fuel high-pressure system 2, measuring range: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303B, BMW DTC 11A602: Fuel high-pressure system 2, measuring range: maximum pressure exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303D, BMW DTC 11A604: Fuel high-pressure system 2, measuring range: minimum pressure undershot
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10ED, BMW DTC 11A701: Fuel high-pressure system, control: fuel mass outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3283, BMW DTC 11A701: Fuel high-pressure system, control: fuel mass outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10EE, BMW DTC 11A702: Fuel high-pressure system, control: calculated fuel mass invalid
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3284, BMW DTC 11A702: Fuel high-pressure system, control: calculated fuel mass invalid
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10F7, BMW DTC 11A801: Fuel high-pressure system 2, control: fuel mass outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3285, BMW DTC 11A801: Fuel high-pressure system 2, control: fuel mass outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10F8, BMW DTC 11A802: Fuel high-pressure system 2, control: calculated fuel mass invalid
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3286, BMW DTC 11A802: Fuel high-pressure system 2, control: calculated fuel mass invalid
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DE, BMW DTC 11AC01: High-pressure fuel system, cold start: Pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DF, BMW DTC 11AC02: High-pressure fuel system, cold start: Pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15EE, BMW DTC 11AD01: High-pressure fuel system 2, cold start: Pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15EF, BMW DTC 11AD02: High-pressure fuel system 2, cold start: Pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P213F, BMW DTC 11B004: Fuel pump, function: emergency shutdown
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1214, BMW DTC 11B101: Fuel pump: speed too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1215, BMW DTC 11B102: Fuel pump: speed too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1216, BMW DTC 11B104: Fuel pump: limp-home mode
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1217, BMW DTC 11B108: Fuel pump: overtemperature
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C4, BMW DTC 11B201: Fuel low-pressure system, control: delivery-rate control outside valid range
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C5, BMW DTC 11B202: Fuel low-pressure system, control: delivery rate outside limit value due to ageing
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C6, BMW DTC 11B204: Fuel low-pressure system, control: minimum delivery rate outside limit value due to ageing
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0004, BMW DTC 11C201: Fuel-supply control valve, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0003, BMW DTC 11C202: Fuel-supply control valve, activation: short circuit to ground or open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1282, BMW DTC 11C301: Fuel-supply control valve 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1281, BMW DTC 11C302: Fuel-supply control valve 2, activation: short circuit to ground or open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15AA, BMW DTC 120008: Charge-air pressure control, leakage: Charge-air pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0234, BMW DTC 120208: Charge-air pressure control, upper value: charge-air pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0299, BMW DTC 120308: Charge-air pressure control, lower value: charge-air pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1260, BMW DTC 120408: Charge-air pressure control, deactivation: charge-air pressure buildup disabled
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15AF, BMW DTC 120508: Charge-air pressure control 2, leakage: charge-air pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02CA, BMW DTC 120608: Charge-air pressure control 2, upper value: charge-air pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P02CB, BMW DTC 120708: Charge-air pressure control 2, lower value: charge-air pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0238, BMW DTC 121001: Charge-air pressure sensor, electric: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0237, BMW DTC 121002: Charge-air pressure sensor, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0242, BMW DTC 121101: Charge-air pressure sensor 2, electric: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0241, BMW DTC 121102: Charge-air pressure sensor 2, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12A9, BMW DTC 121201: Charge-air pressure sensor, run-on: pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12A8, BMW DTC 121202: Charge-air pressure sensor, run-on: pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12B7, BMW DTC 121301: Charge-air pressure sensor 2, run-on: pressure too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P12B6, BMW DTC 121302: Charge-air pressure sensor 2, run-on: pressure too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0035, BMW DTC 122001: Bypass blow-off valve, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0034, BMW DTC 122002: Bypass blow-off valve, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0033, BMW DTC 122004: Bypass blow-off valve, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P00C2, BMW DTC 122101: Bypass blow-off valve 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P00C1, BMW DTC 122102: Bypass blow-off valve 2, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P00C0, BMW DTC 122104: Bypass blow-off valve 2, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0246, BMW DTC 123001: Wastegate valve, activation: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0245, BMW DTC 123002: Wastegate valve, activation: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0243, BMW DTC 123004: Wastegate valve, activation: Open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0250, BMW DTC 123101: Wastegate 2, activation: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0249, BMW DTC 123102: Wastegate 2, activation: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0247, BMW DTC 123104: Wastegate 2, activation: Open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction