LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 3.0L - Cooling System - Engine Code(S): CATA >> 19 Cooling System >> Description And Operation >> Coolant Pipes Overview

Coolant Pipes Overview

Part 1 

Fig 1: Identifying Coolant Pipes Overview (1 Of 2)
GWWA19-10813Courtesy of AUDI OF AMERICA, LLC
  1. O-ring
    • Replace
  2. Nut
    • 9 Nm
  3. Right Coolant Pipe
  4. Bolt
    • 23 Nm
  5. Seal
    • Replace
  6. Bleeder Screw
    • 9 Nm
  7. Engine Lifting Eye
  8. Bolt
    • 9 Nm
  9. Bolt
    • 9 Nm
  10. Connection Piece
  11. O-ring
    • Replace
  12. Upper Right Coolant Pipe
  13. Bolt
  14. Engine Cover Bolt
  15. O-ring
    • Replace
  16. Connecting Piece
  17. Bolt
    • 9 Nm
  18. Coolant Temperature Sensor -G62-
  19. O-rings
    • Replace
    • Note the different diameter
  20. Rear Coolant Pipe
  21. Bolt
    • 9 Nm
  22. O-ring
    • Replace
  23. Bolt
    • 9 Nm
  24. Left Rear Coolant Pipe on the Exhaust Gas Recirculation Auxiliary Cooler
  25. Bolt
    • 9 Nm
  26. O-ring
    • Replace
  27. Left Rear Coolant Pipe on the Transmission
  28. Bolt
    • 9 Nm
  29. Bolt
    • 9 Nm
  30. Upper Coolant Pipe
  31. Nut
    • 9 Nm
  32. O-ring
    • Replace

Part 2 

Fig 2: Identifying Coolant Pipes Overview (2 Of 2)
GWWA19-10814Courtesy of AUDI OF AMERICA, LLC
  1. Seals
    • Replace
  2. Banjo Bolt
    • 15.5 Nm
  3. Bolt
    • 9 Nm
  4. Coolant Pipe
    • To the cylinder heads
  5. Coolant Hose
    • From the exhaust gas recirculation coolant thermostat
  6. Seal
    • Replace
  7. Bleeder Screw
    • 9 Nm
  8. Engine Cover Bolt
  9. Upper Left Coolant Pipe
  10. Bolt
    • 9 Nm
  11. Left Rear Coolant Pipe
  12. Bolt
    • 9 Nm
  13. Bolt
    • 9 Nm
  14. Bolt
    • 9 Nm
  15. Left Coolant Pipe
  16. Bolt
    • 9 Nm
  17. O-ring
    • Replace