Left Rear Coolant Pipe

Special tools and workshop equipment required

Removing

-- Remove the left intermediate pipe. Refer to LEFT INTERMEDIATE PIPE .

-- Remove exhaust gas recirculation (EGR) cooler switch-over valve 2 -N381- -3-.

Fig 1: Identifying Hose Clamps -1 & 2-, EGR Cooler Switch-Over Valve -3- And Bolts -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the left rear coolant pipe from the coolant hoses by loosening the hose clamps -1- and -2-.

Installing

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps appropriate for the model.

-- Install the left intermediate pipe. Refer to LEFT INTERMEDIATE PIPE .

-- Fill with coolant FILLING .