Left Rear Coolant Pipe On Transmission

Removing 

-- Drain the coolant. Refer to COOLING SYSTEM, DRAINING AND FILLING .

-- Remove the primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER .

-- Free up the coolant hoses -arrow-.

-- Loosen the hose clamp -2- and lift clamp -4- to remove the coolant hoses.

-- Free up the transmission vent hose -arrow-.

-- Remove the bolts -1- and -3- ; then remove the left coolant pipe on the back of the transmission and the coolant hoses.

Installing 

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to COOLANT PIPES OVERVIEW .

-- Connect the coolant hose to the coupling. Refer to Figure.

-- Install primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER .

-- Fill with coolant FILLING .