Left Rear Coolant Pipe On Exhaust Gas RECIRCULATION Auxiliary Cooler

Special tools and workshop equipment required 

• Hose Clip Pliers VAS 6362

Removing 

-- Drain the coolant. Refer to COOLING SYSTEM, DRAINING AND FILLING .

-- Carefully pull the engine cover -arrows- off the 4 bolts one after the other.

-- Remove the bolt -1-.

-- Remove the left rear coolant pipe from the exhaust gas recirculation auxiliary cooler.

-- Loosen the clamp -arrow- and remove the coolant hose.

Installing 

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to COOLANT PIPES OVERVIEW .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

-- Fill with coolant FILLING .