Disassembly [09/2021 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, 2023 Toyota Corolla Cross, and 2022 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE SYMBOL EMBLEM

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 1

REMOVE NO. 2 BACK DOOR NAME PLATE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 5

REMOVE NO. 5 BACK DOOR NAME PLATE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 6

REMOVE NO. 4 BACK DOOR NAME PLATE (w/ Grade Mark)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for Type A:
Refer to PROCEDURE - Step 3
for Type B:
Refer to PROCEDURE - Step 4

REMOVE NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE (for AWD)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 2

REMOVE DOOR PULL HANDLE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a moulding remover D, disengage the claws to remove the door pull handle.

REMOVE BACK DOOR INSIDE HANDLE BASE ASSEMBLY (w/ Power Back Door)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE BACK DOOR SIDE GARNISH LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE BACK DOOR SIDE GARNISH RH
1. Use the same procedure as for the LH side.

REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a moulding remover A, disengage the claws and guides to remove the No. 3 back door service hole cover.

REMOVE BACK DOOR SERVICE HOLE COVER LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a moulding remover A, disengage the claws and guides to remove the back door service hole cover LH.

REMOVE BACK DOOR SERVICE HOLE COVER RH
1. Use the same procedure as for the LH side.

REMOVE BACK DOOR TRIM PANEL ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY
Refer to PROCEDURE - Step 5
REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
See step 2
REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
1. Use the same procedure as for the LH side.
REMOVE POWER BACK DOOR WARNING BUZZER (w/ Power Back Door)
See step 5
REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
See step 5
REMOVE REAR WIPER ARM HEAD CAP (w/ Rear Wiper)
Refer to PROCEDURE - Step 5
REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)
Refer to PROCEDURE - Step 6

REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

Refer to PROCEDURE - Step 7

REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper)
Refer to PROCEDURE - Step 8
REMOVE REAR WASHER NOZZLE (w/ Rear Wiper)
Refer to PROCEDURE - Step 2

REMOVE BACK DOOR OUTSIDE GARNISH

Refer to PROCEDURE - Step 5

REMOVE REAR TELEVISION CAMERA ASSEMBLY
Refer to PROCEDURE - Step 2
REMOVE LICENSE PLATE LIGHT ASSEMBLY
Refer to PROCEDURE - Step 5

REMOVE REAR LIGHT ASSEMBLY LH

Refer to REMOVAL [09/2021 - ]

REMOVE REAR LIGHT ASSEMBLY RH
1. Use the same procedure as for the LH side.
REMOVE CENTER STOP LIGHT ASSEMBLY
Refer to PROCEDURE - Step 2

REMOVE BACK DOOR PANEL CUSHION

REMOVE BACK DOOR DUST PROOF SEAL