LUGGAGE COMPARTMENT DOOR (for Sedan): Installation
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL LUGGAGE COMPARTMENT DOOR WEATHERSTRIP
- Install the luggage compartment door weatherstrip.
- INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD
- w/ Grand Spare Tire:
Install the luggage compartment trim inner pad.
- w/o Grand Spare Tire:
Install the luggage compartment trim inner pad.
- w/ Grand Spare Tire:
- INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH
- Engage the 5 clips and install the luggage compartment trim cover inner RH.
- INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LH
HINT:
Use the same procedure as described for the RH side.
- INSTALL REAR FLOOR FINISH PLATE
- Engage the 8 claws and 2 clips and install the rear floor finish plate.
- INSTALL DECK FLOOR BOX RH (w/ Grand Spare Tire)
- Install the deck floor box RH.
- INSTALL DECK FLOOR BOX LH (w/ Grand Spare Tire)
HINT:
Use the same procedure as described for the RH side.
- INSTALL DECK SIDE BOX DOOR RH (w/ Grand Spare Tire)
- Install the deck floor box RH.
- INSTALL DECK SIDE BOX DOOR LH (w/ Grand Spare Tire)
HINT:
Use the same procedure as described for the RH side.
- INSTALL SPARE WHEEL COVER ASSEMBLY
- Install the spare wheel cover.
- INSTALL LUGGAGE COMPARTMENT FLOOR MAT
- Install the luggage compartment floor mat.
- INSTALL SYMBOL EMBLEM (See INSTALLATION )
- INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (See INSTALLATION )
- INSTALL NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE (See INSTALLATION )
- INSTALL LICENSE PLATE LIGHT ASSEMBLY (See INSTALLATION )
- INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (See INSTALLATION )
- INSTALL DOOR UNLOCK SWITCH (w/ Theft Deterrent System) (See INSTALLATION )
- INSTALL LUGGAGE COMPARTMENT LOCK CYLINDER
- w/ Theft deterrent system:
Install the luggage compartment lock cylinder with the 2 nuts.
Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
- Connect the luggage compartment door lock link and connector.
- w/o Theft deterrent system:
Install the luggage compartment lock cylinder with the 2 nuts.
Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
- Connect the luggage compartment door lock link.
- w/ Theft deterrent system:
- INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (See INSTALLATION )
- INSTALL HIGH MOUNTED STOP LIGHT (w/ Rear Spoiler) (See INSTALLATION )
- INSTALL REAR SPOILER PROTECTOR SIDE LH (w/ Rear Spoiler) (See INSTALLATION )
- INSTALL REAR SPOILER PROTECTOR SIDE RH (w/ Rear Spoiler) (See INSTALLATION )
- INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler) (See INSTALLATION )
- INSTALL LUGGAGE COMPARTMENT DOOR COVER (for Cold Area Specification Vehicles)
- Engage the 5 clips and install the luggage compartment door cover.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)