BACK DOOR COURTESY SWITCH (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
1. Install the luggage door lock control cable.
2. Install the luggage compartment door lock assembly with the 2 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  Fig 1: Locating Luggage Compartment Door Lock Assembly Bolts And Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector.
4. Install the protector lid.
  
  Fig 2: Locating Protector Lid
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the luggage compartment door lock link.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 3: Locating Luggage Compartment Door Lock Link
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002