LICENSE PLATE LIGHT ASSEMBLY (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LICENSE PLATE LIGHT ASSEMBLY
1. Install the license plate light bulb into the light socket.
2. Turn the license plate light bulb socket and bulb, in the directions indicated by the arrow in the illustration, to install them.
  
  Fig 1: Turning License Plate Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage claw A and claw B, and install the license plate light assembly.
  
  Fig 2: Installing License Plate Light Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH
1. Engage the 3 claws and install the luggage compartment door outside garnish.
  
  Fig 3: Identifying Luggage Compartment Door Outside Garnish Y
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 connectors.
3. Install the luggage compartment door outside garnish with the 2 nuts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
  
  Fig 4: Locating Luggage Compartment Door Outside Garnish Nuts And Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER
1. Install the luggage compartment door lock cylinder with the 2 nuts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
2. Install the luggage compartment door lock link.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 5: Locating Luggage Compartment Door Lock Link
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002