DOOR UNLOCK SWITCH (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL DOOR UNLOCK SWITCH
1. Engage the 2 claws and install the door unlock switch.
  
  Fig 1: Identifying Door Unlock Switch Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT LOCK CYLINDER
1. Install the luggage compartment lock cylinder with the 2 nuts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
2. Connect the luggage compartment door lock link and connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 2: Locating Luggage Compartment Door Lock Link
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002