LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Manual Transaxle & Differential (6MT)) >> Reverse Idler Gear >> Removal

Reverse Idler Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission assembly from the vehicle. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the back-up light switch and the neutral position switch. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>SWITCHES AND HARNESS>REMOVAL .
  3. Remove the transfer case together with the extension case assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>TRANSFER CASE AND EXTENSION CASE ASSEMBLY>REMOVAL .
  4. Remove the transmission case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>TRANSMISSION CASE>REMOVAL .
  5. Remove the drive pinion shaft assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>DRIVE PINION SHAFT ASSEMBLY>REMOVAL .
  6. Remove the main shaft assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MAIN SHAFT ASSEMBLY>REMOVAL .
  7. Remove the front differential assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>FRONT DIFFERENTIAL ASSEMBLY>REMOVAL .
  8. Shift into 4th.
  9. Remove the snap ring.
    G08582136Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the reverse idler gear shaft securing bolt.
    G09482759Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the reverse idler gear shaft by pushing it out.
    NOTE: Support the reverse idler gear assembly with hands to avoid collapsing.
    G08582138Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the reverse idler gear.
  13. Remove the reverse idler gear bushing.
    G08582139Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals