LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Reduction Drive Gear >> Removal

Reduction Drive Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the air breather hose. <Ref. to REMOVAL , Air Breather Hose.>
  3. Remove the control valve body. <Ref. to REMOVAL , Control Valve Body.>
  4. Remove the transmission harness. <Ref. to REMOVAL , Transmission Harness.>
  5. Remove the turbine speed sensor. <Ref. to REMOVAL , Turbine Speed Sensor.>
  6. Remove the secondary speed sensor. <Ref. to REMOVAL , Secondary Speed Sensor.>
  7. Remove the primary speed sensor. <Ref. to REMOVAL , Primary Speed Sensor.>
  8. Remove the inhibitor switch. <Ref. to REMOVAL , Inhibitor Switch.>
  9. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  10. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  11. Remove the transfer driven gear assembly. <Ref. to REMOVAL , Transfer Driven Gear.>
  12. Remove the parking pawl. <Ref. to REMOVAL , Parking Pawl.>
  13. Remove the reduction driven gear assembly. <Ref. to REMOVAL , Reduction Driven Gear.>
  14. Remove the oil pan and oil strainer. <Ref. to REMOVAL , Oil Pan and Strainer.>
  15. Remove the transmission control device. <Ref. to REMOVAL , Transmission Control Device.>
  16. Remove the transmission case. <Ref. to REMOVAL , Transmission Case.>
  17. Remove the reduction drive gear shims, spring retainers, and dish plates.
    Fig 1: Reduction Drive Gear Shims, Spring Retainers And Dish Plates
    G09481643Courtesy of SUBARU OF AMERICA, INC.
  18. Remove the reduction drive gear.
Fig 2: Reduction Drive Gear
G08317982Courtesy of SUBARU OF AMERICA, INC.