LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Transfer Driven Gear >> Removal

Transfer Driven Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  3. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  4. Remove the transfer driven gear assembly.
    Fig 1: Transfer Driven Gear Assembly
    G10218727Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the seal ring from the transfer driven gear assembly.
Fig 2: Locating Seal Ring - Transfer Driven Gear Assembly
G08317901Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals