LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Remove the transmission assembly. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the primary speed sensor.
    Fig 1: Locating Primary Speed Sensor Bolt
    G08317803Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the harness connector from primary speed sensor.
Fig 2: Primary Speed Sensor And Harness Connector
G08317804Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals