General notes: Passenger cars: Crank assembly - AH03.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL ALL
| Assignment of pistons to cylinder bore | ENGINE 266.920/940/960/980 | AH03.10-P-0001-02AK | |
| Assignment of pistons to cylinder bore | ENGINE 639.939 in MODEL 454.0 | AH03.10-P-0001-02FG | |
| Assignment of pistons to cylinder bore | MODEL 451.3/4 with ENGINE 132.9 | AH03.10-P-0001-02MCC | |
| Assignment of pistons to cylinder bore | MODEL 454.0 with ENGINE 134.9, 135.9 | AH03.10-P-0001-02FF | |
| Assignment of pistons to cylinder bore | ENGINE 668.940/941/942 | AH03.10-P-0001-02GD | |
| Assignment of pistons to cylinder bore | ENGINE 166.940/960/990/995 | AH03.10-P-0001-02GF | |
| Assignment of pistons to cylinder bore | AH03.10-B-0001-02A | ||
| Bearing diagram for crankshaft | ENGINE 271 | AH03.20-P-4351-01TK | |
| Bearing diagram for crankshaft | ENGINE 601, 602 (except 602.98), 603 | AH03.20-P-4351-01AW | |
| Bearing diagram for crankshaft | ENGINE 640 | AH03.20-P-4351-01AL | |
| Bearing diagram for crankshaft | ENGINE 266.920/940/960/980 | AH03.20-P-4351-01AK | |
| Bearing diagram for crankshaft | ENGINE 111 | AH03.20-N-4351-01A | |
| Bearing diagram for crankshaft | ENGINE 639.939 in MODEL 454.0 | AH03.20-P-4351-01FG | |
| Bearing diagram for crankshaft | ENGINE 166, 668 | AH03.20-P-4351-01GF | |
| Bearing diagram for crankshaft | ENGINE 601.943, 602.980/982/983/984/985 | AH03.20-N-4351-01B | |
| General information on assigning balancing shaft to engine | ENGINE 112 | AH03.20-P-1000-01AV | |
| Installation notes for crankshaft radial shaft seals | ENGINE 120 | AH03.20-P-0001-01AO | |
| Interference fit of crankshaft bearing cap | ENGINE 640 | AH03.20-P-4351-02AL | |
| Interference fit of crankshaft bearing cap | ENGINE 266.920/940/960/980 | AH03.20-P-4351-02AK | |
| Interference fit of crankshaft bearing cap | ENGINE 134.9, 135.9 in MODEL 454.0 | AH03.20-P-4351-02FF | |
| Interference fit of crankshaft bearing cap | ENGINE 272 | AH03.20-P-4351-02VA | |
| Interference fit of crankshaft bearing cap | ENGINE 639.939 in MODEL 454.0 | AH03.20-P-4351-02FG | |
| Interference fit of crankshaft bearing cap | ENGINE 273 | AH03.20-P-4351-02SX | |
| Interference fit of crankshaft bearing cap | ENGINE 611, 612, 613... | AH03.20-P-4351-02C | |
| Interference fit of crankshaft bearing cap | ENGINE 271 | AH03.20-P-4351-02TK | |
| Interference fit of crankshaft bearing cap | ENGINE 152, 157, 276, 278 | AH03.20-P-4351-02MM | |
| Interference fit of crankshaft bearing cap | ENGINE 166, 668 | AH03.20-P-4351-02GF | |
| Interference fit of crankshaft bearing cap | ENGINE 132.9 in MODEL 451.3/4 | AH03.20-P-4351-02MCC | |
| Interference fit of crankshaft bearing cap | ENGINE 111, 601.943, 602.980/982/983/984/985, 604, 605, 606 | AH03.20-P-4351-02A | |
| Notes on the assessment of pistons and piston rings | ENGINE 133, 152, 156, 157, 177, 178, 277, 279 ENGINE 157, 279 ENGINE 270, 271, 274, 276, 278 |
AH03.10-P-0001-04MM |