Remove/install tensioning rail - AR05.10-P-8127EL
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 157, 276, 278 in MODEL 212, 218
| Remove/install | |||
| 1 | Remove cylinder heads | ENGINE 276.8 left cylinder head | AR01.30-P-5780ELS |
| ENGINE 276.8 right cylinder head | AR01.30-P-5770ELS | ||
| ENGINE 276.9 left cylinder head | AR01.30-P-5780EL | ||
| ENGINE 276.9 right cylinder head | AR01.30-P-5770EL | ||
| ENGINE 157, 278 left cylinder head | AR01.30-P-5780ELB | ||
| ENGINE 157, 278 right cylinder head | AR01.30-P-5770ELB | ||
| 2 | Remove timing case cover | Engine 276.8 | AR01.40-P-8000ELS |
| Engine 276.9 | AR01.40-P-8000EL | ||
| ENGINE 157, 278 | AR01.40-P-8000ELB | ||
| 3 | Remove tensioning rail (1s) and timing chain (3) | ||
| 4 | Remove slide rail (1g) | ||
| 5 | Remove chain tensioner (9) and tensioning rail (7) | *BA05.10-P-1001-01R | |
| 6 | Remove primary chain (5) from intermediate gear (8) | ||
| 7 | Remove slide rail (6) | ||
| 8 | Remove intermediate gear (8) | *BA05.10-P-1004-01R | |
| 9 | Remove tensioning rail (2s) and timing chain (4) | ||
| 10 | Remove slide rail (2g) | ||
| Check | |||
| 11 | Check chain tensioner (9), tensioning rails (1s, 2s), slide rails (1g, 2g, 6) and intermediate gear (8) for wear, galling and damage | ||
| 12 | Install in the reverse order | ||
| 13 | Check cooling system for leaktightness | AR20.00-P-1010EL | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 14 | Carry out an engine test run and check engine for leaktightness |
TIMING CHAIN, CHAIN TENSIONER
| Number | Designation | ENGINE 157 | ENGINE 276 | |
|---|---|---|---|---|
| BA05.10-P-1001-01R | Screw/bolt, chain tensioner to cylinder crankcase/cylinder head | Nm | 9 | 9 |
TIMING CHAIN, CHAIN TENSIONER
| Number | Designation | ENGINE 278 | |
|---|---|---|---|
| BA05.10-P-1001-01R | Screw/bolt, chain tensioner to cylinder crankcase/cylinder head | Nm | 9 |
TIMING CHAIN, CHAIN TENSIONER
| Number | Designation | ENGINE 157 | ENGINE 276 | ||
|---|---|---|---|---|---|
| BA05.10-P-1004-01R | Screw/bolt, journal for intermediate gear to cylinder crankcase | M10 | Nm | 55 | 55 |
TIMING CHAIN, CHAIN TENSIONER
| Number | Designation | ENGINE 278 | ||
|---|---|---|---|---|
| BA05.10-P-1004-01R | Screw/bolt, journal for intermediate gear to cylinder crankcase | M10 | Nm | 55 |