Section 21 (15 Engine - Cylinder Head, Valve Drive 2.0L -- 982 - BOXSTER/CAYMAN)

• WM, 150520 - Removing And Installing Camshafts (Includes Setting Timing)
  • Tools
  • Technical Values
  • Preliminary Work
  • Removing Camshafts
  • Installing Camshafts
    • Component Markings And Distinguishing Features
    • Installing Camshafts And Setting Timing
  • Subsequent Work
• WM, 153619 - Removing And Installing Chain TENSIONER
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Cylinder Bank 3 And 4
  • Removing Chain TENSIONER
    • Removing Chain Tensioner For Cylinder Bank 3 And 4
    • Removing Chain Tensioner For Cylinder Bank 1 And 2
  • Installing Chain TENSIONER
  • Subsequent Work
    • Subsequent Work For Cylinder Bank 3 And 4
  • Subsequent Work For Cylinder Bank 1 And 2
• WM, 153919 - Removing And Installing Actuator For Camshaft Control
  • Technical Values
  • Preliminary Work
  • Removing Actuator For Camshaft Control
  • Installing Actuator For Camshaft Control
  • Subsequent Work
• WM, 155519 - Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment
  • Technical Values
  • Removing Solenoid Hydraulic Valve For Valve Lift Adjustment
  • Installing Solenoid Hydraulic Valve For Valve Lift Adjustment
• WM, 157019 - Removing And Installing Cylinder Heads
  • Technical Values
  • Preliminary Work
  • Removing Cylinder Head
  • Installing Cylinder Head
  • Subsequent Work
• WM, 157037 - Disassembling And Assembling Cylinder Head
  • Tools
  • Preliminary Work
  • Disassembling Cylinder Head
    • Notes
    • Removing Valve-Stem Seal
    • Installing Valve-Stem Seals
  • Assembling Cylinder Head
  • Subsequent Work
• WM, 158219 - Remove And Install The Cylinder Head Cover
  • Tools
  • Technical Values
  • Preliminary Work
  • Remove The Cylinder Head Cover
    • Removing Cylinder Head Cover (Bank 1-2)
  • Install The Cylinder Head Cover
    • Installing Cylinder Head Cover (Bank 1-2)
    • Installing Cylinder Head Cover (Bank 3-4)
  • Subsequent Work