LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (55 - Lids, Flaps) >> WM 559037 Disassembling And Assembling Rear Lid (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear lid → Removing Rear Lid  .
  2. Remove trim panels for rear lid → Removing lining for rear lid .
  3. Remove rear spoiler → Removing rear spoiler .
  4. Remove rear window → Removing Rear Window .
  5. Remove rear window seal → Removing Rear Window Seal .
  6. Remove moulding for rear lid → Removing moulding for rear lid .
  7. Remove buzzer on rear lid → Removing Rear Lid Buzzer  .
  8. Remove tilt sensor on rear lid → Removing Tilt Sensor For Rear Lid  .
  9. Remove wire harness on rear lid → Removing wiring harness for tailgate
  10. Remove upper part of rear lock → Removing Upper Part Of Rear Lock  .
  11. Remove release for rear lid → Removing Release For Rear Lid  .
  12. Remove number plate light → Removing Number Plate Light .
  13. Remove wiper motor for rear window wiper system → Removing Wiper Motor For Rear Window Wiper System .
  14. Remove rear window release → Removing Bottom Section For Rear Window Release .
scientia non olet · About LEMON Manuals