LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- 911 CARRERA (991) >> WM 195919 Removing And Installing Coolant Distributor Housing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

  1. Secure engine carrier.

    → INSTALLING ENGINE CARRIER .

  2. Install front silencer.

    → INSTALLING FRONT SILENCER .

  3. Secure the generator.

    → INSTALLING GENERATOR .

  4. Vehicles with Porsche Dynamic Chassis Control (PDCC):  Install hydraulic pump.

    → INSTALLING PUMP (PDCC) .

  5. Vehicles without Porsche Dynamic Chassis Control (PDCC):  Install console with deflection roller.

    → INSTALLING CONSOLE WITH DEFLECTION ROLLER .

  6. Secure air-conditioning compressor.

    → INSTALLING AIR-CONDITIONING COMPRESSOR .

  7. Install drive belt.

    → INSTALLING DRIVE BELT .

  8. Install resonance tube.

    → INSTALLING RESONANCE TUBE .

  9. Install air cleaner housing.

    → INSTALLING AIR CLEANER HOUSING .

  10. Fill in coolant.

    → FILLING COOLANT .

  11. Bleed the cooling system.

    → 190107 BLEEDING THE COOLING SYSTEM .

  12. Visually inspect components for leaks.