Installing Air Cleaner Housing

Position air cleaner housing in the engine compartment.
Fit rubber shroud -3- on the throttle housing.
1. 2.1. Tighten screw-type clamp.
2. 2.2. Connect connecting lines -1 and 2- and close spring band clamps.
  
  Fig 1: Identifying Throttle Housing Rubber Sleeve
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit and tighten fastening screws for the air cleaner housing.
Tool: Use 1/4-inch torque wrench -1-.

Fig 2: Tightening Air Cleaner Housing Fastening Screws (Right Side)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.