Installing Drive Belt

If you intend to reuse the old belt, make sure to observe the running direction marked earlier.

Fig 1: Identifying Vibration Balancer And Drive Belt

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. Position the belt on the running track on the vibration balancer.
   Fig 2: Identifying Drive Belt

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 2.1. Then guide the flat side of the belt through between the pulley and engine carrier -arrow-  .
   Fig 3: Locating Coolant Pump Pulley And Drive Belt

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 3.1. Then, pre-position it on the tensioning roller.

   Drive belt routing: 

   Fig 4: Drive Belt Routing Diagram (Engine Removed)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. Drive belt
   2. Generator pulley
   3. PDCC pump pulley/deflection roller
   4. Air-conditioning compressor pulley
   5. Crankshaft vibration balancer
   6. Coolant pump pulley
   7. Belt tensioner tensioning roller

1. 4.1. Fit an open-ended wrench (a/f 30) -2-  on the hexagon on the tensioner -3-  and turn it clockwise as far as it will go.
2. 4.2. Fit drive belt on the tensioning roller and let the tensioner slide slowly back into tensioning position (anti-clockwise).
   Fig 5: Installing Drive Belt

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.