Section 163 (42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 4201TW Tightening Torques For Rear Axle (All Models)
- Technical Values
- Tightening Torques For Rear Axle
- Tightening Torques For Axle Strut
- Notes
- Tightening Torques For Wheel Carrier
- Tightening Torques For Spring Strut
- Tightening Torques For Stabilizer
- Tightening Torques For Drive Shaft
- Tightening Torques For Plug-In Couplings For Steering Hydraulics
- Tightening Torques For Plug-In Couplings For Clutch Hydraulic System
- Tightening Torques For Wheel Mounting
- WM 422119 Removing And Installing Rear Drive Shaft (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 422855 Replacing Bellows Drive Shaft (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0)
- WM 427137 Disassembling And Assembling Rear Spring Strut (911 Gt3 RS, 911 Gt2, 911 Gt3)
- WM 427137 Disassembling And Assembling Rear Spring Strut - With And Without PASM (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)
- WM 427137 Disassembling And Assembling Rear Spring Strut - As Of 2010 Model (911 Gt3, 911 Gt3 RS)
- WM 429019 Removing And Installing Rear Anti-Roll Bar (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0)
- WM 429155 Replacing Connecting Link (Suspension/Stabilizer) (911 Gt3, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0)