Section 21 (Door Front, Central Locking System)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
- Removing and installing door
- Removing and installing inner door release (bowden cable) for door lock
- Removing and installing door handle
- Disassembling and assembling door
- Adjustment instructions for assembly of the door
- Diagram: sheetmetal clips and grommets
- Basic setting of door lock
- Standardising the system
- Fitting the door window in the clamping jaws
- Adjusting the door window angle in the vehicle's longitudinal direction
- Adjusting the door window height
- Adjustment of the door window pressing force on the door seal at the top and sides
- Adjusting the lower stop of the power window unit
- Disassembling and assembling door handle
- Setting the door