Adjusting the lower stop of the power window unit
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- When replacing the power window unit, make sure that the correct position of the lower limit stop is selected for the respective model.
- There are two bores lying one above the other with the screwed-on limit stops in the front power window unit rail.
- A limit stop for the model 986, 986S must not be removed.