Combination Meter On-Vehicle Service - With Diagnostics
- Service Specifications
- Special Tools
- Combination Meters Diagnostic
- Standard Flow Of Diagnostic Troubleshooting
- Diagnostic Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC B1200: Odometer failure
- DTC B1201: Fuel information problem
- DTC B1209: Test mode
- DTC B2463: Rheostat switch sticking
- DTC B2464: Meter information SW sticking (High contrast meter)
- DTC U0100: Engine CAN timeout
- DTC U0141: ETACS CAN timeout
- DTC U0164: A/C CAN timeout
- DTC U0168: WCM/F.A.S.T. CAN timeout
- DTC U0184: AUDIO CAN timeout
- DTC U0230: POWER GATE CAN timeout
- DTC U0245: NAVI/DISP. AUDIO CAN timeout
- DTC U1000: OSS CAN timeout
- DTC U1190: No receive fault detect signal
- DTC U1195: Coding not completed
- Trouble Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: Power supply circuit check; Inspection Procedure 2: The odometer and the trip meter are not displayed.; Inspection Procedure 3: No needle meters work.; Inspection Procedure 4: If the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate normally
- Inspection Procedure 5: The speedometer does not work (the other meters work)
- Inspection Procedure 6: The tachometer does not work (the other meters work)
- Inspection Procedure 7: Tone alarm do not sound normally
- Notes
- Technical Description (Comment)
- Notes
- FCM collision warning tone alarm/FCM approaching warning tone alarm/ACC approaching warning tone alarm/ACC automatic canceling tone alarm/ACC vehicle stop/ACC vehicle-traveling-ahead missing indication tone alarm/ACC_FCM set/FCM set/ACC_FCM deactivation/cruise control set indication tone alarm
- LDW warning tone alarm
- Theft-alarm tone alarm
- Electric steering wheel lock malfunction warning tone alarm (vehicles with OSS)
- OSS-related malfunction warning tone alarm (vehicles with OSS)
- Engine switch reminder tone alarm (vehicles with OSS)
- Keyless operation key reminder tone alarm (vehicles with KOS)/Ignition key reminder tone alarm (vehicles without KOS)
- Light reminder tone alarm
- Door-ajar warning tone alarm
- Freeze warning tone alarm
- Parking brake reminder tone alarm
- Multi information display interrupt display tone alarm
- Meter information switch or rheostat illumination switch (High contrast meter) operation tone alarm
- Turn-signal light tone alarm
- A/T shift cancel tone alarm/Paddle shift cancel prohibition tone alarm, ETACS-ECU function customize tone alarm, A/C operation tone alarm, audio operation tone alarm
- Troubleshooting Hints
- Diagnosis
- Inspection Procedure 8: Fuel gauge does not work (the other meters work)
- Inspection Procedure 9: The combination meter light does not illuminate normally or the multi-information display is not displayed normally
- Inspection Procedure 10: The multi-information display screen cannot be changed with the operation of the meter information switch
- Inspection Procedure 11: Parking brake reminder tone alarm does not sound.; Inspection Procedure 12: Brake warning light does not illuminate
- Inspection Procedure 13: Seat belt reminder function does not work normally
- Inspection Procedure 14: The combination meter and instrument panel illumination does not illuminate normally
- Service Data
- Actuator Test Table
- Special Function Table
- Check Procedure For Each Multi Information Display Screen (High Contrast Meter)
- Check At Combination Meter Terminals
- On-Vehicle Service
- Speedometer Check
- Tachometer Check
- Fuel Level Sensor Check
- Service Reminder Function Set
- Combination Meter
- Meter Information Switch