LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> Outlander GT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter On-Vehicle Service - With Diagnostics >> On-Vehicle Service >> Fuel Level Sensor Check >> AWD >> Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

  1. Remove the fuel pump module (Refer to FUEL PUMP MODULE REPLACEMENT ) < Main >.
  2. Remove the fuel level sensor (Refer to FUEL LEVEL SENSOR (SUB) REPLACEMENT < AWD >) < Sub >.
    Fig 1: Identifying Fuel Level Sensor Float Height
    G10225500Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.
    STANDARD VALUE

    Float position Float height mm (in)
    Main Sub
    Stopper position "F" (height A) 166.2 (6.5) 48.8 ± 3.0 (1.9 ± 0.1)
    Stopper position "E" (height B) 38.8 (1.5) 238.0 ± 3.0 (9.3 ± 0.1)
scientia non olet · About LEMON Manuals