LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> Outlander GT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter On-Vehicle Service - With Diagnostics >> On-Vehicle Service >> Service Reminder Function Set >> How To Operate The Scan Tool (M.U.T.-III) >> 1. Extra Reminder Setting

1. Extra Reminder Setting

In addition to the current warning period, the temporary service reminder warning period can be set.

NOTE: Prior to this Extra reminder setting, execute the Extra reminder cancel and the Periodic reminder schedule set (including the case that it is not necessary to change the schedule).
  1. On the "Service Reminder" screen, select "3 Extra reminder setting."
    NOTE: The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has not been set.
    Fig 1: Selecting Extra Reminder Setting Screen
    G10225502Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set the temporary warning period (distance or month) of the "Set value."
    NOTE: Either input of distance or month can execute the setting.
  3. Press the "OK" button.
    Fig 2: Selecting Temporary Warning Period (Distance/Month)
    G10225503Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. The temporary warning period is set.
    NOTE: The screen indicates that "2 month" has been added to the temporary warning period (No. 5 in the data list). (The distance of No. 4 in the data list has not been set.)