Section 29 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (3 Of 6))

• DTC P1836: Shift Fork 1 Malfunction
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - blocked >
  • DTC Set Conditions < Functional Check - Blocked >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Blocked >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Neutral >
  • DTC Set Conditions < Functional Check - Neutral >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Neutral >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 1 requested but shift fork 3 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 1 Requested But Shift Fork 3 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 1 Requested But Shift Fork 3 Movement >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 1 requested but shift fork 2 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 1 Requested But Shift Fork 2 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 1 Requested But Shift Fork 2 Movement >
  • Probable Causes
  • Diagnostic Procedure
• DTC P183D: Shift Fork 2 Malfunction
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - blocked >
  • DTC Set Conditions < Functional Check - Blocked >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Blocked >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Neutral >
  • DTC Set Conditions < Functional Check - Neutral >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Neutral >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 2 requested but shift fork 4 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 2 Requested But Shift Fork 4 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 2 Requested But Shift Fork 4 Movement >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 2 requested but shift fork 1 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 2 Requested But Shift Fork 1 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 2 Requested But Shift Fork 1 Movement >
  • Probable Causes
  • Diagnostic Procedure
• DTC P1844: Shift Fork 3 Malfunction
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - blocked >
  • DTC Set Conditions < Functional Check - Blocked >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Blocked >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Neutral >
  • DTC Set Conditions < Functional Check - Neutral >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Neutral >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 3 requested but shift fork 1 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 3 Requested But Shift Fork 1 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 3 Requested But Shift Fork 1 Movement >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - shift fork 3 requested but shift fork 4 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 3 Requested But Shift Fork 4 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 3 Requested But Shift Fork 4 Movement >
  • Probable Causes
  • Diagnostic Procedure
• DTC P184B: Shift Fork 4 Malfunction
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - blocked >
  • DTC Set Conditions < Functional Check - Blocked >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Blocked >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Neutral >
  • DTC Set Conditions < Functional Check - Neutral >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Neutral >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - Shift fork 4 requested but shift fork 2 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 4 Requested But Shift Fork 2 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 4 Requested But Shift Fork 2 Movement >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - shift fork 4 requested but shift fork 3 movement >
  • DTC Set Conditions < Functional Check - Shift Fork 4 Requested But Shift Fork 3 Movement >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 3 Requested But Shift Fork 4 Movement >
  • Probable Causes
  • Diagnostic Procedure
• DTC P1852: Shift Fork 1 or 2 opposite direction movement
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - move opposite direction right side >
  • DTC Set Conditions < Functional Check - Move Opposite Direction Right Side >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Move Opposite Direction Right Side >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - move opposite direction left side >
  • DTC Set Conditions < Functional Check - Move Opposite Direction Left Side >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Move Opposite Direction Left Side >
  • Probable Causes
  • Diagnostic Procedure
• DTC P1855: Shift Fork 3 or 4 opposite direction movement
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - move opposite direction right side >
  • DTC Set Conditions < Functional Check - Move Opposite Direction Right Side >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Move Opposite Direction Right Side >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Functional check - move opposite direction left side >
  • DTC Set Conditions < Functional Check - Move Opposite Direction Left Side >
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern < Functional Check - Move Opposite Direction Left Side >
  • Probable Causes
  • Diagnostic Procedure
• DTC P1857: Odd number gear axle interlock
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1858: Even number gear axle interlock
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P185D: Clutch open not possible
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1862: High side 1 system (Overcurrent)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1863: High side 1 system (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1864: High side 1 system (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1866: High side 2 system (Overcurrent)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1867: High side 2 system (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1868: High side 2 system (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186A: High side 3 system (Overcurrent)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186B: High side 3 system (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186C: High side 3 system (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186D: High side 1 system (Voltage low range out)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186E: High side 2 system (Voltage low range out)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P186F: High side 3 system (Voltage low range out)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1870: Engine torque signal abnormality
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1871: APS system (Signal abnormality)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1872: Between shift lever and TC-SST system (Q-A function abnormality)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1873: Clutch 1 System (Pressure abnormality)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1874: Clutch 2 System (Pressure abnormality)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1875: Damper Speed Sensor System (Poor performance)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1876: Gear Block 1st
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1877: Gear Block 2nd
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1878: Gear Block 3rd
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P1879: Gear Block 4th
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P187A: Gear Block 5th
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P187B: Gear Block 6th
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P187C: Gear Block Reverse
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1880: EOL Mode Active
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1881: Twin clutch SST control mode switch system (Malfunction)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1885: Shift Fork 1 Jump Out
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1886: Shift Fork 2 Jump Out
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1887: Shift Fork 3 Jump Out
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1888: Shift Fork 4 Jump Out
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P1890: Teach-In Not Completed
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC P2718: Clutch/Shift Pressure Solenoid 1 System (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2719: Clutch/Shift Pressure Solenoid 1 System (Overcurrent)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2720: Clutch/Shift Pressure Solenoid 1 System (Short to ground)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2721: Clutch/Shift Pressure Solenoid 1 System (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2727: Clutch/Shift Pressure Solenoid 2 System (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2728: Clutch/Shift Pressure Solenoid 2 System (Overcurrent)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2729: Clutch/Shift Pressure Solenoid 2 System (Short to ground)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2730: Clutch/Shift Pressure Solenoid 2 System (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2733: Clutch/Shift Switching Solenoid 1, spool stuck
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2736: Clutch/Shift Switching Solenoid 1 System (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2738: Clutch/Shift Switching Solenoid 1 System (Short to ground)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2739: Clutch/Shift Switching Solenoid 1 System (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2742: Fluid Temperature Sensor System (Output low range out)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2743: Fluid Temperature Sensor System (Output high range out)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2766: Input Shaft 2 (Even number gear axle) Speed Sensor System (Poor performance)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence) < Rationality >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Rationality (Failure condition 1) >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Rationality (Failure condition 2) >
  • DTC Set Conditions
    • Check Conditions < Rationality >
    • JUDGMENT CRITERIA < Rationality >
    • Check Conditions < Rationality plausibility failure >
    • JUDGMENT CRITERIA < Rationality plausibility failure >
  • OBD-II Drive Cycle Pattern < Rationality >
  • LOGIC FLOW CHARTS (Monitor Sequence) < Rationality - plausibility failure >
  • OBD-II Drive Cycle Pattern < Rationality Plausibility Failure >
  • Probable Causes
  • Diagnostic Procedure
• DTC P2809: Clutch/Shift Switching Solenoid 2, spool stuck
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2812: Clutch/Shift Switching Solenoid 2 System (Open circuit)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
    • Notes
    • Probable Causes
  • Diagnostic Procedure
• DTC P2814: Clutch/Shift Switching Solenoid 2 System (Short to ground)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC P2815: Clutch/Shift Switching Solenoid 2 System (Short to power supply)
  • Notes
  • Diagnostic Function
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC U0001: Bus-off
  • Notes
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC U0100: Engine Time-out Error
  • Notes
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • Monitor Execution Conditions (Other Monitor And Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • LOGIC FLOW CHARTS (Monitor Sequence)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • OBD-II Drive Cycle Pattern
  • Probable Causes
  • Diagnostic Procedure
• DTC U0103: Shift Lever Time-out Error
  • Notes
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC U0121: ASC Time-out Error
  • Notes
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC U0136: AWC Time-out Error
  • Notes
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure
• DTC U0141: ETACS Time-out Error
  • Notes
  • Descriptions Of Monitor Methods
  • Probable Causes
  • Diagnostic Procedure