LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body Equipment - Repair -- Cooper (F54) >> 51 44 Roof Trim Panel >> Removing and installing or replacing headlining (with sliding/tilting sunroof)

Removing and installing or replacing headlining (with sliding/tilting sunroof)

Preliminary work needed: 

Complete removal only: 

Removal: 

Slide driver's seat fully forwards and fold back backrest.

Slide front passenger seat fully forwards and fold back backrest.

Fold rear seat backrests forwards.

Release expanding rivets (1 and 2).

Detach headlining (3) downwards off edge protection with aid of a second person.

Unfasten plug connection.

Lay down headlining (3).

If removing completely: 

Feed out headlining (3) over windshield opening with the aid of a second person.

G13824432Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Bring headlining (3) into installation position and connect plug connections.

Mount expanding rivets (1 and 2).

NOTE: Make sure that the headlining (3) is seated correctly at all adjacent parts.
G13824432Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

Complete removal only: