Remove/Install Wheels - AR40.10-S-1100E
Model 447, 448
MODIFICATION NOTES
| 19.07.2023 | Method adapted | Operation steps 3, 7 |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notice | Information on tires/rims | AH40.10-P-9411-01A | |
| Notice | Limited maximum speed for winter tires with speed index V | AH40.10-P-1020-03A | |
| Notice | General information on rim/tire conversions | AH40.10-P-1050-01A | |
| Notice | General information on chassis modifications | AH40.10-P-1050-02A | |
| TIREFIT tire sealant | AH40.10-P-0001-01A | ||
| Information about regulations for recommended wheel/tire combinations | AH40.10-P-0003-01A | ||
| General information on malfunctions in the brake system | AH42.30-D-2007-01KOA | ||
| Remove | |||
| 1 | Raise vehicle. | AR00.60-S-1000E | |
| 2 | Remove hub caps. | If installed. | |
| 3 | Remove wheel and tire assemblies. | Use a wheel lift dolly if necessary. Wheel lift |
|
| Check | |||
| 4 | Clean and check components of wheel threaded connections, and protect against corrosion. | AR40.10-D-1100-02A | |
| Paste, hot lubrication 1 kg, DBL 6879.20 | *BR00.45-Z-1005-06A | ||
| Assembly cleaner If damage exists, ↓ replace damaged components. |
*BR00.45-Z-1028-04A | ||
| 5 | Check condition of tires. | If damage exists, ↓ perform suitable repair measures. |
AR40.10-D-0001A |
| 6 | Check tire pressure. | ||
| Tires - General information | AH40.10-D-1020-01KOA | ||
| If tire pressure wrong, ↓ Correct tire pressure. |
AP40.15-S-4060E | ||
| Install | |||
| 7 | Position wheel and tire assemblies and screw in wheel bolts. | Screw in wheel bolts in a diagonal pattern. Otherwise proper seating of the disk wheels is not guaranteed. Use a wheel lift dolly if necessary. Wheel lift |
|
| 8 | Lower vehicle. | ||
| 9 | Tighten wheel bolts. | Tighten wheel bolts in crosswise pattern. Otherwise proper seating of the disk wheels is not guaranteed. |
|
| *BA40.10-Z-1002-01KOH | |||
| *BA40.10-Z-1001-01KOH | |||
| 10 | Install hub caps. | If removed. | |
| 11 | Reinitialize tire pressure sensors using vehicle diagnosis system. | If one or more tires were replaced or if a wheel and tire assembly rotation was carried out from front to back or from left to right, or if one or more tire pressure sensors were replaced. | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-S-2000-04E |
WHEELS
| Number | Designation | Model 447, 448 | |
|---|---|---|---|
| BA40.10-Z-1001-01KOH | Steel rim wheel bolt | Nm | 200 |
WHEELS
| Number | Designation | Model 447, 448 | |
|---|---|---|---|
| BA40.10-Z-1002-01KOH | Light alloy rim wheel bolt | Nm | 180 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DBL 6879.20 | A 000 989 76 51 |
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |