LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment (2 Of 2) -- 447 Chassis >> Maintenance >> Correct Tire Pressure, Including Spare Wheel - AP40.15-S-4060E

Correct Tire Pressure, Including Spare Wheel - AP40.15-S-4060E

Model 447, 448 

G16484029Courtesy of MERCEDES-BENZ USA
G16484030Courtesy of MERCEDES-BENZ USA
Notice  General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment Model 447 with engine 780 AH00.00-Z-0300-01A
  Information on tires/rims   AH40.10-P-9411-01A
INSPECT Check     
1 Check and correct tire pressure. IMPORTANT Check and correct tire pressure only when tires are cold
For tire pressures see the tire pressure table in the operators manual or on
(1) in the fuel filler flap
 
2 Remove spare wheel. With CODE RR6 (Spare wheel with vehicle jack)  
3 Check and correct tire pressure of spare wheel. Model 447, 448
with code RR6 (Spare tire with jack)
Model 447, 448
with code RR8 (Spare wheel holder, inside on side wall)
IMPORTANT Correct tire pressure of spare wheel to the highest tire pressure specified for the vehicle.
 
4 Install spare wheel. With CODE RR6 (Spare wheel with vehicle jack)  
5 Enter set tire pressures in maintenance sheet.    
6 Restart tire pressure monitor (TPM). With CODE RY2 (Tire pressure monitor)
IMPORTANT See owner's manual.