Remove/Install Windshield - AR67.10-P-1700ME

Model 167 

	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Notice	Notes on removal/installation of windows		AH67.10-P-1000-02RT
	Notes on removal/installation of windshield		AH67.10-P-1000-03MFA
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove
1	Remove cover for air/water duct.		AR83.10-P-1411ME
2	Remove the front water deflectors.		AR88.80-P-4000ME
3	Remove A-pillar trims.		AR68.30-P-4050ME
4	Remove rain and light sensor with additional functions (B38/2).		AR82.30-P-7801ME
5	Remove the multifunction camera (A40/11 or A40/13).	Model 167 with code 233 (Adaptive cruise control Plus 1 (DISTRONIC PLUS)) Model 167 with code 239 (Adaptive cruise control Pro (DISTRONIC PRO)) with code 51B (Rating, country group EURONCAP) Model 167 with code 243 (Active Lane Keeping Assist (camera)) Model 167 with code 258 (Active Brake Assist System) with code 51B (Rating, country group EURO-NCAP) Model 167 with code 513 (Road sign recognition system) Model 167 with code 608 (Automatic high beam control (IHC)) Model 167 with code 628 (INTELLIGENT HEADLAMP CONTROL PLUS (IHC+))	AR54.21-P-3000ME
6	Remove the augmented reality camera (B84/14).	Model 167 with code 21U (Video recording function (Dashcam)) Model 167 with code U19 (Augmented reality video)	AR54.30-P-0004ME
7	Cover vehicle interior in the repair area.
8	Mask off areas around windshield with suitable tape.
	Risk of injury  from cutting wire tearing or becoming hot and from splinters of glass where cutting out bonded windows	Wear protective gloves and safety glasses.	AS67.00-Z-0004-01A
9	Cut out windshield and remove.	Helper required to remove windshield.	AR67.10-P-1000-11SX
	Install
	Notes on handling adhesive		AH67.00-P-1000-01A
10	Prepare windshield window frame for installing window.		AR67.10-P-1501-01ME
	General notes about painting the body flange in the glazing area	Use only primer fillers and primer sticks approved by Daimler AG: https://xentryportal.i.daimler.com	AH98.00-P-9408-06A
		Assembly cleaner	*BR00.45-Z-1028-04A
11	Prepare windshield for installing window.		AR67.10-P-1700-04ME
12		Glue on position of rubber window spacers based on old positions. Remove protective foil from rubber window spacers only on one side.
		Assembly cleaner	*BR00.45-Z-1028-04A
13	Close hood.
14	Align windshield in body opening.		AR67.10-P-1000-09ME
		Helper required.
		Distance between top edge of window and front edge of roof	*BE67.10-P-1001-02KOA
		Feeler gauge	Fig 2
15	Remove protection foil from rubber window spacers.
16	Apply adhesive material.	Install windshield within 10 min after applying adhesive material. Otherwise the adhesive force of the adhesive material starts to decrease.	AR67.10-P-1000-08ME
		Adapter	Fig 1
17	Install windshield.		AR67.10-P-1700-05ME
		Helper required. Observe the manufacturer's specifications for the curing time of the adhesive material. Perform following work only after curing time.
18	Open hood.
19	Remove adhesive strips and cover material from vehicle.
20	Clean repair area.
21	Install the augmented reality camera (B84/14).	Model 167 with code 21U (Video recording function (Dashcam)) Model 167 with code U19 (Augmented reality video)	AR54.30-P-0004ME
22	Install the multifunction camera (A40/11 or A40/13).	Model 167 with code 233 (Adaptive cruise control Plus (DISTRONIC PLUS)) Model 167 with code 239 (Adaptive cruise control Pro (DISTRONIC PRO)) with code 51B (Rating, country group EURO-NCAP) Model 167 with code 243 (Active Lane Keeping Assist (camera)) Model 167 with code 258 (Active Brake Assist System) with code 51B (Rating, country group EURO-NCAP) Model 167 with code 513 (Road sign recognition system) Model 167 with code 608 (Automatic high beam control (IHC)) Model 167 with code 628 (INTELLIGENT HEADLAMP CONTROL PLUS (IHC+))	AR54.21-P-3000ME
23	Install rain and light sensor with additional functions (B38/2).		AR82.30-P-7801ME
24	Install A-pillar trims.		AR68.30-P-4050ME
25	Install the front water deflectors.		AR88.80-P-4000ME
26	Install cover for air/water duct.		AR83.10-P-1411ME
27	Install wiper arms.		AR82.30-P-6100ME
	Check
28	Check head-up display.	Model 167 with code 463 (Head-up display)
			AR54.30-P-6401ME

WINDSHIELD

Number	Designation		Model 167 (except 167.3)	Model 167.3
BE67.10-P-1001-02KOA	Distance between top edge of window Dimension "A" and front edge of roof	mm	2, 5 (±1, 0)	3 (+1/-0, 5)

Fig 1: Identifying Adapter (000 589 86 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIAL

Number	Designation	Order number
BR00.45-Z-1028-04A	Assembly cleaner	A 000 986 56 01