Collision - Front End & Fire Wall (213 Chassis)

• General Information
  • General Notes: Passenger Cars: Front End And Fire Wall - Ah62.00-Z-9999AZ
• Testing & Repair
  • Carry Out Visual Inspection Of Structural Components - Ar62.10-P-1101-01LWE
  • Carry Out Measurements On Structural Components - Ar62.10-P-1110-02LWE
  • Install And Weld In Wheel Well - Ar62.20-P-1200-17LW
  • Prepare Wheel Well For Installation - Ar62.20-P-1200-19LW
  • Remove Wheel Well - Ar62.20-P-1200-21LW
  • Replace Complete Wheel Well - Ar62.20-P-1200LW
  • Remove Suspension Strut Tower - Ar62.20-P-1232-01LW
  • Prepare Suspension Strut Tower For Installation - Ar62.20-P-1232-03LW
  • Install Suspension Strut Tower - Ar62.20-P-1232-04LW
  • Replace Suspension Strut Tower - Ar62.20-P-1232LW
  • Separate Longitudinal Member Front Section - Ar62.20-P-1260-01LW
  • Prepare Longitudinal Member Front Section - Ar62.20-P-1260-05LW
  • Install And Weld In Longitudinal Member Front Section - Ar62.20-P-1260-07LW
  • Replace Longitudinal Member Front Section - Ar62.20-P-1260LW
  • Separate Upper Front Longitudinal Member - Ar62.20-P-1286-01LW
  • Prepare Upper Front Longitudinal Member - Ar62.20-P-1286-02LW
  • Install Upper Front Longitudinal Member - Ar62.20-P-1286-03LW
  • Install Welding Device - Ar62.20-P-1286-05LW
  • Replace Upper Front Longitudinal Member - Ar62.20-P-1286LW
  • Partially Remove Upper Front Longitudinal Member - Ar62.20-P-1287-01LW
  • Partially Prepare Upper Front Longitudinal Member - Ar62.20-P-1287-02LW
  • Partially Install Upper Front Longitudinal Member - Ar62.20-P-1287-03LW
  • Partially Replace Upper Front Longitudinal Member - Ar62.20-P-1287LW
  • Remove Firewall Half - Ar62.25-P-1110-01LWE
  • Prepare Firewall Half For Installation - Ar62.25-P-1110-02LWE
  • Install Firewall Half - Ar62.25-P-1110-05LWE
  • Replace Left Firewall Half - Ar62.25-P-1110LWE
  • Remove/Install CROSSMEMBER Under Instrument Panel - Ar62.30-P-1250LWE
  • Replace Complete Front End Assembly Together With Reinforcement - Ar62.30-P-1570LW
  • Remove/Install Front End CROSSMEMBER
    • Remove/Install Front End Crossmember - AR62.30-P-2300LW
    • Remove/Install Front End Crossmember - AR62.30-P-2300LWA
• Test & Adjustment Values
  • Test And Adjustment Values: Passenger Cars: Front End And Fire Wall - Be62.00-Z-9999AZ
  • Structural Component - Be62.10-P-1000-02A
• Component Modifications
  • Technical Modifications: Passenger Cars: Front End And Fire Wall - BT62.00-Z-9999AZ
• Torque Specifications
  • Tightening Torques: Passenger Cars: Front End And Fire Wall - BA62.00-Z-9999AZ
  • Cross Member And Front Reinforcement - BA62.30-P-1000-01H
  • Front Area With Front Reinforcement - BA62.30-P-1000-02K
• Special Tools
  • 140 589 26 63 01 Steel Stamping Letters Set - WS62.00-P-0018-01K
  • 140 589 26 63 03 Stamping Numbers Set - WS62.00-P-0018-03K
  • 140 589 26 63 04 Star Die - WS62.00-P-0018-04K
  • 140 589 26 63 05 Steel Stamping Letters Set - WS62.00-P-0018-05K
  • 1140 589 26 63 00 Stamping Symbols Set - WS62.00-P-0018K
  • 1253 589 01 23 00 Fixture - WS62.00-P-0037K
  • 1253 589 02 23 00 Fixture - WS62.00-P-0038K
  • 213 589 00 23 00 Adapter Set - WS62.00-P-0039B