Retrofit AMG trims - AZ88.00-P-0001H
MODEL 210 to 31.5.99
| The trim parts supplied with the accessories and spare parts are primed and must be painted in the same color as the vehicle before being installed. | |||
| In the Federal Republic of Germany after conversion installation approval is required from an officially recognized expert or inspector from a motor vehicle test center or a test engineer from an officially recognized supervisory organization. | |||
| Body kit, certificate | * for Germany only | OF88.00-P-1000-01FB | |
| Assignment for equipment line part kits | AZ88.00-P-0001-01B | ||
| Remove | |||
| 1 | Remove front bumper | ||
| AR88.20-P-2000F | |||
| 2 | Remove rear bumper | ||
| AR88.20-P-2200F | |||
| Installation | |||
| 3 | Convert front bumper | AZ88.00-P-0001-02G | |
| 4 | Converting side paneling | AZ88.00-P-0001-04H | |
| 5 | Convert rear bumper | AZ88.00-P-0001-03G |
Parts ordering notes
| Part no. | Designation | Quantity |
|---|---|---|
| B6 603 6000 | Front bumper, complete consisting of: | 1 |
| H WA210 885 01 25 | Front bumper without mounting material | 1 |
| H WA210 885 01 26 | Left flap | 1 |
| H WA210 885 02 26 | Right flap | 1 |
| H WA210 820 01 56 | Left auxiliary fog lamp | 1 |
| H WA210 820 02 56 | Right auxiliary fog lamp | 1 |
| H WA210 885 01 14 | Left auxiliary fog lamp bracket | 1 |
| H WA210 885 02 14 | Right auxiliary fog lamp bracket | 1 |
| H WA210 540 01 08 | Auxiliary fog lamp cable | 2 |
| H WA210 506 99 40 | Stationary heater bracket | 1 |
| N914 130 006 200 | Bolt | 1 |
| A002 994 81 45 | Sheet metal nut | 6 |
| N914 128 004 306 | Bolt | 6 |
| N009 021 005 202 | Washer | 6 |
| A002 990 97 97 | Blind rivet | 8 |
| N913 002 006 0009 | Nut M6 | 1 |
| H WA104 584 01 43 | AMG sticker | 1 |
| B6 603 6001 | Rear bumper, complete W210 consisting of: | 1 |
| H WA210 885 02 25 | Rear bumper without mounting material | 1 |
| A002 990 97 97 | Blind rivet | 6 |
| B6 603 6001 | Rear bumper, complete S210 consisting of: | 1 |
| H WA210 885 03 25 | Rear bumper without mounting material | 1 |
| A002 990 97 97 | Blind rivet | 6 |
| B6 603 6002 | Side paneling kit, complete consisting of | 1 |
| H WA210 698 01 54 | Left side paneling | 1 |
| H WA210 698 02 54 | Right side paneling | 1 |
| H WA210 698 01 30 | Left front cover | 1 |
| H WA210 698 02 30 | Right front cover | 1 |
| H WA210 698 03 30 | Left rear cover | 1 |
| H WA210 698 04 30 | Right rear cover | 1 |
| HWA210 690 99 14 | Mounting material | 1 |
| B6 603 6004 | Chrome-plated cover set W 210 (also available individually) | 1 |
| B6 603 6007 | Chrome-plated cover set S 210 (also available individually) | 1 |
| B6 603 6005 | Set of side brush guards with chrome (also available individually) | 1 |