Remove/install inner sealing rail - AR72.10-P-1600E

MODEL 202, 210, 220, 240 

Shown on model 202 

Fig 1: Identifying Inner Sealing Rail Components - Shown On Model 202

	Remove/install
1.1	Open crank window	Vehicles with mechanical window lift mechanism.
1.2	Open window	Vehicles with power windows.
2.1	Remove window crank	Model 202 Only with mechanical window lift mechanism.	AR72.10-P-1100GV
3	Remove front door lining	Model 202	AR72.10-P-1000E
		Model 210	AR72.10-P-1000F
		Model 220	AR72.10-P-1000M
		Model 240	AR72.10-P-1000HA
4	Remove rear door lining	Model 202	AR72.12-P-1010E
		Model 210	AR72.12-P-1010F
		Model 220	AR72.12-P-1010M
		Model 240.0	AR72.12-P-1010H
		Model 240.1	AR72.12-P-1010HA
5	Press sealing rail (1) off of inner door panel with assembly wedge	Mounting wedge Insert assembly wedge directly next to clips (2)	Figure
6	Check clips (2), replace if necessary	Clips (2) are attached to inner door panel.
7	Install in the reverse order

Special tools 

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)