Testing and repair work: Passenger cars: Electrical system - engine - AR15.00-Z-9119AB
ENGINE 119
| Test rotorless high voltage distribution | ENGINE 119, 120... | AR15.10-P-3000WE | |
| Replacing ignition cables with M3 cable screw | ENGINE 104.94/99, 111, 119.97 (except 104.990) | AR15.12-P-0512G | |
| Removing and installing high voltage distributor cap, high voltage distributor rotor | ENGINE 119.97 | AR15.12-P-1928E | |
| Removing and installing ignition coils | ENGINE 119.97 | AR15.12-P-2003E | |
| Removing and installing ignition coils | ENGINE 119.981/982/985 | AR15.12-P-2003EA | |
| Removing and installing crankshaft position sensor | ENGINE 119.97 | AR15.12-P-2133E | |
| Removing and installing crankshaft position sensor | ENGINE 119.981/982/985 | AR15.12-P-2133EA | |
| Removing and installing, adjusting camshaft position sensor | ENGINE 119.97 | AR15.12-P-2143E | |
| Remove/install knock sensors | ENGINE 119.97 | AR15.12-P-2184E | |
| Remove/install knock sensors | ENGINE 119.981 /982/985 | AR15.12-P-2184EA | |
| Removing and installing starter | ENGINE 119, 120... | AR15.30-P-7100EC | |
| Removing and installing starter | ENGINE 119.985 in MODEL 210.072 | AR15.30-P-7100FAF | |
| Prerequisites for testing alternator | ENGINE 103, 104, 112, 113, 119, 120 in MODEL 129 | AR15.40-P-5009C | |
| Prerequisites for testing alternator | ENGINE 104, 111, 112, 113, 119, 602, 604, 605, 606, 611, 612, 613... | AR15.40-P-5009F | |
| Checking regulation voltage of alternator | ENGINES 103, 104, 112, 113, 119, 120 in MODEL 129 | AR15.40-P-5010C | |
| Checking regulation voltage of alternator | ENGINE 104, 111, 112, 113, 119, 602, 604, 605, 606, 611, 612, 613... | AR15.40-P-5010F | |
| Testing alternator charging current | ENGINES 103, 104, 112, 113, 119, 120 in MODEL 129 | AR15.40-P-5011C | |
| Checking charging current of alternator | ENGINE 104, 111, 112, 113, 119, 602, 604, 605, 606, 611, 612, 613... | AR15.40-P-5011F | |
| Removing and installing generator | ENGINE 119, 120 in MODEL 129 | AR15.40-P-5032CS | |
| Remove and install generator | ENGINE 112.921 /941, 113.940/980, 119.985 in MODEL 210 | AR15.40-P-5032ED | |
| Removing and installing the generator poly-V-pulley | ENGINES 103, 104, 119, 120 in MODEL 129 | AR15.40-P-5710CS | |
| Remove/install generator belt pulley | ENGINE 104, 111, 112, 113, 119, 601, 602, 604, 605, 606... | AR15.40-P-5710EA | |
| Removing and installing regulator of generator | ENGINE 103, 104, 119, 120, 112, 113 in MODEL 129 | AR15.40-P-5760CS | |
| Removing and installing regulator of generator | ENGINE 104, 111, 112, 113, 119, 602, 604, 605, 606, 611... | AR15.40-P-5760F |