LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 559 (Information Center [Instrumentation/Driver Info]) >> Instrument Cluster Disassembly/Assembly

Instrument Cluster Disassembly/Assembly

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not drop the instrument cluster or damage the printed board. This will lead to a system malfunction.
  1. Perform the instrument cluster configuration when replacing it. See INSTRUMENT CLUSTER CONFIGURATION .
  2. Disconnect the negative battery cable.
  3. Remove the following parts:
    1. Front scuff plate (Driver side). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
    2. Front side trim (Driver side). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
    3. Upper panel. See UPPER PANEL REMOVAL/INSTALLATION .
    4. Decoration panel (Driver side). See DECORATION PANEL REMOVAL/INSTALLATION .
    5. Hood release lever. See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .
    6. Meter hood. See METER HOOD REMOVAL/INSTALLATION .
    7. Instrument cluster. See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .
  4. Disassemble in the order indicated in the table.
    Fig 1: Identifying Instrument Cluster Unit, Cover, Ring And Case
    G06201209Courtesy of MAZDA MOTORS CORP.
  5. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals