Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards -- Defender/L663

• Exterior Body & Paint Pre-Delivery Inspection (PDI) Standards
  • Description And Operation
    • General Requirements (G2344315)
      • Facility Minimum Requirements (For PDI Centers)
      • Conduct Of Personnel
    • Introduction (G1676681)
      • General
    • Cosmetic Acceptance Standards (G1676682)
      • General
      • A Zone - Medium To High Visibility
        • Paint
        • Body
        • Wheels
        • Glass
      • B Zone - Low To Hidden Visibility
        • Paint
        • Body
    • Exterior Pre-Delivery Inspection Process (G1676688)
      • General
      • Conducting The Inspection
      • Inspection Process - Description Of The Work Element
      • Reporting Warranty Inspection Data
    • Identification Of Exceptions (G1676687)
      • Exception Types
      • Transportation
      • Warranty
      • Internal
    • Paint Exceptions And Associated Repair Procedures (G1676685)
      • Fine Blistering
      • Blowing
      • Chipped Paint/Scratches
      • CISSING
      • Contamination
      • Dirt/Dust On BASECOAT
      • Dirt In Clear Coat
      • Dirt Under BASECOAT
      • Dull Finish/Abnormal Loss Of Gloss
      • Etching
      • Flaking/DELAMINATIONG
      • HALOES
      • Off Shade
      • Opacity/Inadequate Color Coverage
      • Orange Peel
      • OVERSPRAY
      • Polishing Compound
      • Polishing Witness Marks (Circular Fine Scratches)
      • Poor Metal Finish
      • Runs
      • Sanding Scratches
      • Shadiness/SHEARY
      • Solvent Retention
      • Staining/Discoloration
    • Exterior Surface Zone Identification (G3293347)