Paint Exceptions And Associated Repair Procedures (G1676685): OVERSPRAY
NOTE:
Alternative Terminology: Masking lines, inconsistency and hazing.
Description
Overspray may appear as areas of dust-like paint particles adhering to the paint surface, or as paint particles only partially absorbed into the finish, reducing the gloss and hazing or misting the reflective ability of the surface.
Warranty Related Cause
- Defective application process by manufacturer.
Non-warranty Related Cause(s)
- None.
Rectification Process - Overspray Clear Coat
- Determine if exception is permissible or not permissible. For additional information, Refer to: COSMETIC ACCEPTANCE STANDARDS
- Permissible exception does not require a repair so should be passed as CA.
- Repair any not permissible exceptions by polishing, or flatting and polishing.
Rectification Process - Overspray Color Coat Plus Clear Coat
- Determine if exception is permissible or not permissible. For additional information, Refer to: COSMETIC ACCEPTANCE STANDARDS
- Permissible exception does not require a repair so should be passed as CA.
- Not permissible exceptions must be repaired as follows:
- Attempt removal of concern by either polishing or flat and polishing.
- If polishing does not remove concern, flat and re-paint affected area.