Radiator Support Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radiator Support, Mount Bolts & Mount Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon) or Front Bumper Fascia Replacement (Escalade) or Front Bumper Fascia Replacement (Tahoe) or Front Bumper Fascia Replacement (Avalanche) or Front Bumper Fascia Replacement (Z71) . Remove the grille support. Refer to Support Replacement - Radiator Grille Reinforcement . Remove the front fascia bracket. Refer to Fascia Support Bracket Replacement - Front Upper . Remove the hood latch. Refer to Hood Latch Replacement . Remove the radiator. Refer to Radiator Replacement . Remove the A/C condenser. Refer to Condenser Replacement . Remove the fender bolts. Refer to Front Fender Replacement - Left Side and Front Fender Replacement - Right Side .
1	Radiator Support Mount Nuts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 70 N.m (50 lb ft)
2	Radiator Support Mount Bolts (Qty: 2) Tighten: 70 N.m (50 lb ft)
3	Radiator Support