Front Bumper Fascia Replacement (Yukon)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Bumper Fascia & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the headlamps. Refer to Headlamp Replacement Headlamp Replacement (Non HID) or Headlamp Replacement (Yukon) or Headlamp Replacement (Tahoe, Avalanche) or Headlamp Replacement (Cadillac Escalade) . Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement .
1	Front Fender Bracket Bolts (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 7 N.m (62 lb in)
2	Front Fascia To Impact Bar Brace Bolts (Qty: 2) Tighten: 10 N.m (89 lb in)
3	Front Fascia To Radiator Core Support Bolts (Qty: 6) Tighten: 6 N.m (53 lb in)
4	Front Fascia Tip: Disconnect the fog lamp connectors before attempting removal.