Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Cushion Cover & Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) . Remove the recliner handle. Refer to Seat Back Recliner Handle Replacement - Rear (Tahoe/Yukon/Escalade with Bucket) . Remove the outer finish cover. Refer to Seat Cushion Outer Trim Panel Replacement - Rear Seat (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Outer Trim Panel Replacement - Rear Seat (Tahoe/Yukon/Escalade with Split Bench) . Remove the inner finish cover. Refer to Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Split Bench) . Remove the cushion lower trim cover. Refer to Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench) .
1	Rear Seat Cushion Cover Tip: Disconnect the seat cushion cover j-channel from the seat cushion frame. Disconnect the electrical connector if equipped with heated seat. Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.
2	Rear Seat Cushion Pad

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the rear seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) .
Remove the recliner handle. Refer to Seat Back Recliner Handle Replacement - Rear (Tahoe/Yukon/Escalade with Bucket) .
Remove the outer finish cover. Refer to Seat Cushion Outer Trim Panel Replacement - Rear Seat (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Outer Trim Panel Replacement - Rear Seat (Tahoe/Yukon/Escalade with Split Bench) .
Remove the inner finish cover. Refer to Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Split Bench) .
Remove the cushion lower trim cover. Refer to Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench) .

Rear Seat Cushion Cover
Tip:

Disconnect the seat cushion cover j-channel from the seat cushion frame.
Disconnect the electrical connector if equipped with heated seat.
Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.

Rear Seat Cushion Pad