LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Split Bench)

Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Recliner Inner Finish Cover & Nut
GM1685312Courtesy of GENERAL MOTORS CORP.
Seat Cushion Inner Panel Replacement - Rear (Tahoe/Yukon/Escalade with Split Bench)

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Rear Seat Recliner Inner Finish Cover Nut
Tip:  The nut is located in a recessed hole on the inboard side of the inner trim panel.
2 Rear Seat Recliner Inner Finish Cover
Tip:  Pull away from seat to disengage the integral retainers.