Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Cushion Trim Panel & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Tip: The 60 percent seat is shown, the 40 percent seat is similar.
1	Rear Seat Recliner Handle Tip: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle.
2	Rear Seat Recliner Outer Finish Cover
3	Rear Seat Recliner Inner Finish Cover
4	Rear Seat Cushion Trim Panel Screws (Qty: 5) Tighten: 2 N.m (18 lb in)
5	Rear Seat Cushion Trim Panel Push In Retainer (Qty: 2)
6	Rear Seat Cushion Trim Panel