LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT)

Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Cushion Trim Panel & Bolts
GM1708120Courtesy of GENERAL MOTORS CORP.
Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT)

Callout Component Name
Preliminary Procedure: 
Unlatch the rear seat cushion and fold forward.
1 Rear Seat Cushion Trim Panel Bolt (Qty: 9)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Rear Seat Cushion Trim Panel