Radiator Support Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radiator Support, Mount Bolts & Mount Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fascia. Refer to Front Bumper Fascia Replacement (Escalade) or Front Bumper Fascia Replacement (Tahoe) or Front Bumper Fascia Replacement (Avalanche) or Front Bumper Fascia Replacement (Z71) or Front Bumper Fascia Replacement (Yukon) . Remove the grille support. Refer to Radiator Grille Reinforcement Support Replacement . Remove the front fascia bracket. Refer to Front Upper Fascia Support Bracket Replacement . Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement . Remove the radiator. Refer to Radiator Replacement (Non-HP2) or Radiator Replacement (HP2) . Remove the A/C condenser. Refer to Air Conditioning Condenser Replacement (Gas) . Remove the fender bolts. Refer to Front Fender Replacement - Left Side and Front Fender Replacement - Right Side .
1	Radiator Support Mount Nuts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 70 N.m (52 lb ft)
2	Radiator Support Mount Bolts (Qty: 2) Tighten: 70 N.m (52 lb ft)
3	Radiator Support