Front Bumper Fascia Replacement (Avalanche)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement - Left Side and Front Wheelhouse Liner Replacement - Right Side . |
|
| 1 | Front Fender Bracket Bolt (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 7 N.m (62 lb in) |
| 2 | Front Fascia To Impact Bar Brace Bolt (Qty: 2) Tighten: 10 N.m (89 lb in) |
| 3 | Front Fascia To Radiator Core Support Bolt (Qty: 6) Tighten: 6 N.m (53 lb in) |
| 4 | Front Fascia Tip: Disconnect the fog lamp connectors before attempting removal. |