Front Fender Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V) . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (Sedan)Air Inlet Grille Panel Replacement (Coupe) . Remove the headlamp. Refer to Headlamp Replacement (Sedan)Headlamp Replacement (Coupe with HID)Headlamp Replacement (Coupe with Halogen) . Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement (Sedan)Rocker Panel Molding Replacement (Coupe) . Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Non V-Series)Front Wheelhouse Liner Replacement (V-Series) . Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement (Sedan)Air Inlet Grille Panel Extension Replacement (Coupe) . If removing the passenger side fender, remove the windshield washer solvent container. Refer to Windshield Washer Solvent Container Replacement (Sedan with CE1)Windshield Washer Solvent Container Replacement (Sedan with CE4)Windshield Washer Solvent Container Replacement (Coupe) . Remove the front fender insulator. Refer to Front Fender Insulator Replacement .
1	Front Fender Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Fender Nut Tighten 9 N.m (80 lb in)
3	Front Fender Bolt (Qty: 6) Tighten 9 N.m (80 lb in)
4	Front Fender Procedure Transfer parts as needed.